0

SDRplay Radio Spectrum Processor RSP1

  • Product Code: SDRplay Radio Spectrum Processor RSP1
  • Availability: In Stock
Rs 13,500.00 Ex Tax: Rs 13,500.00
Product DetailsRSP1 Radio Spectrum ProcessorThe SDRplay RSP1 is a powerful, wideband Radio Spectrum Processor (RSP). It is a fully assembled SDR module, covering all frequencies from 10 kHz to 2 GHz, with a huge 10 MHz bandwidth. A black plastic housing makes the SDRplay robust and portable.With its wide coverage, the SDRplay RSP1 provides flexibility in your application of choice. SDRplay covers all amateur, broadcast and professional bands from experimental LF through HF, VHF and UHF. Connect the SDRplay to a PC and add an antenna to create a communications receiver. The RSP1 is designed for use either with SDRuno, or other freely available 3rd party SDR software packages ( for exampl...
Product Details

RSP1 Radio Spectrum Processor

The SDRplay RSP1 is a powerful, wideband Radio Spectrum Processor (RSP). It is a fully assembled SDR module, covering all frequencies from 10 kHz to 2 GHz, with a huge 10 MHz bandwidth. A black plastic housing makes the SDRplay robust and portable.
With its wide coverage, the SDRplay RSP1 provides flexibility in your application of choice. SDRplay covers all amateur, broadcast and professional bands from experimental LF through HF, VHF and UHF. Connect the SDRplay to a PC and add an antenna to create a communications receiver. 
The RSP1 is designed for use either with SDRuno, or other freely available 3rd party SDR software packages ( for example HDSDR, SDR-Console and CubicSDR. This software, alongside the RSP1, enables you to transform your PC into a general coverage receiver for virtually all radio and TV signals. 
SDRplay RSP1 comes with “Getting Started” information which contains all the information for you to get up and running. This guide includes details of the free SDR software required for your SDRplay.

Here at RS we have 3 versions of the Radio Spectrum Processor:

RSP1 - Original SDR receiver with one antenna port 
RSP2 - SDR receiver with multiple antenna ports and external clocking feature 
RSP2pro - RSP2 receiver in a rugged metal case 

Robust black plastic housing
Coverage: 10 kHz to 2 GHz
Up to 10 MHz bandwidth
12-bit ADC
USB interface
Normal polarity female SMA connector
Compatible with existing open source radio software
Compatible with Mirics Radio & TV software
Supported platforms: Windows, Linux, Mac, Android and Raspberry Pi 2/3

Note

The SDRplay is not supplied with the antenna or USB-A to USB-B cable.

Radio Modules SDRplay


http://www.sdrplay.com/wp-content/uploads/2017/01/161129RSP1DatasheetV3.pdf

http://www.sdrplay.com/docs/SDRplay_Technical_Information.pdf

http://www.sdrplay.com/docs/SDRplay_Conceptual_Block_Diagram_r1p1.pdf

http://www.sdrplay.com/docs/SDRplay_RSP_Schematics_r2p3.pdf

http://www.sdrplay.com/docs/SDRplay_AGC_technote_r2p2.pdf

http://www.sdrplay.com/Panadapterintro1.pdf








Write a review

Note: HTML is not translated!
    Bad           Good
Copyright © Radiojitter Concepts Lab. All rights reserved.